İZOTERMAL İNG KATOLAK

 

 

 

 

 

İZOTERMAL ISI YALITIM SİSTEMLERİ İNŞAAT KİMYA A.Ş. INTERNATIONAL PRICE LIST (2016)

 

 

 

 

 

PRODUCT

PRODUCT

USAGE

CONSUMPTION

PRICE

CODE

NAME

AREA

    M2

  

 

 

 

 

 

 

1

ISOTHERMAL INSULATION

                                                     1 bucket is 18 liters   

 

 

COATING

EXTERIORS

  14-15 M2

 

2MM

 

 

 

 

1- APPLICATION METHOD:

 

a- Isothermal insulation lining usage method: it is 18 liters and coats 100-125m2 surfaces.

Before using divide bucket content equally into 2 parts, Add 1 or 1,5 liters of water to you half of it. Apply after mixed. Drying time is 1-2 hours in sunny weather.

 

b- ISOTHERMAL INSULATION COATING APPLICATION METHOD :( 2MM): ( 2MM )

 

Open the bucket, mix thoroughly with a mixer. Apply with satin roll with thoroughly. Immerse roll into bucket well. Shake slightly and apply material remaining on roll slowly to the wall without pushing, material on roll finishes with about 80-90 cm application, again immerse roll and continue application, after applied to 2 -3 m2 surface cover the object by applying from top to bottom and right to left. The final application:  While giving pattern definitely do it from top to down.  It is a must that it is in the same direction. After one layer is dried about 6 hours you should apply one more layer on it.  

 

2

ISOTHERMAL HEAT AND WATER  

      ROOF, TERRACE AND ETC.       1 bucket 18 is liter

 

 

SURFACE COATING

     ALL KINDS OF WET

   11-12M2

    

2MM

          SURFACES

 

 

 

2- FOR FLOORING, TERRACE-ROOF ETC. SURFACES:

  

 APPLICATION METHOD:

 

Firstly after cracks, breaks, surging surfaces are repaired and leveled on surfaces and after repaired parts dried 1 layer of isothermal insulation lining is applied to terrace. After lining is dried (1-2 hours) 1 layer isothermal floor covering is applied to surface. It is left to dry for at least (12-24 hours). Do not apply without completely dried. Without drying of 1st layer the second layer cannot be applied. The 2nd layer application is left for drying for (18-24 hours). After drying; 1 layer of silicone binder is applied and the application is completed.

   Note: After the application don’t walk on it at least for 48 hours.

 

    NOTE; FOR VERY COLD REGIONS 3 + 2MM (İZO-PLUS)

 

 

3

ISOTHERMAL HEAT INSULATION

                                                          1 bucket is 18 liter 

 

 

FINE PLASTER

                   EXTERIORS AND INTERIORS

8-10 M2

 

3MM

                            3 MM

 

 

 

3- ISOTHERMAL INSULATION PLASTER APPLICATION METHOD:

  

Exterior primer (applies as primer given in figure 1): after primer is dried bucket is opened to apply 3mm isothermal heat insulation plaster and mixed fully applied with plaster shovel as if applying plaster however it is important that material binds to surface and then to give 3 mm thickness.  Drying period of 3 mm plaster is at least 24 hours. After it is dried 2 layers of colored isothermal final layer isothermal heat insulation coating is applied. (See b)

                                             

 

4

ISOTHERMAL EXTERIOR

   INTERIOR AND EXTERIOR   1 bucket is 18 liters

100-125

 

INSULATION PRIMER

           SURFACES

    M2

     

 

 

 

 

5

ISOTHERMAL SURFACE

    ALL ROOF, TERRACE AND ETC.     1 bucket is 18 liters 

80-100

 

INSULATION

     WET SURFACES

    M2

    

PRIMER

      TO BE APPLIED AS FINAL LAYER

 

 

                   

 

  • PRICES ARE EX-FACTORY.
  • VAT IS NOT INCLUDED IN PRICES.
  • IT CAN BE APPLIED ALSO WITH AIRLESS MACHINE.

                                                                                                           Cafer Doğan

                                                                                                          İzotermal A.Ş.

                                                                                                      Chief Executive Officer